Induction Heating Power Module 5V-12V 120W Induction Heating Board With Coil

Product Details :

• Brand : SLB Works
• Manufacturer : SLB Works
• Country of Origin : India
• Colour : Other
• Number of Memory Sticks : 1
• Item part number : 284800140843
• Included Components : Induction Heating Power Module 5V-12V 120W Induction Heating Board With Coil

Product Description :

Induction Heating Power Module 5V-12V 120W Induction Heating Board With Coil100% brand new and high qualityFeatures:Mini ZVS induction heating plate and heater coil without cooling fan.High power 120W (when 12V induction heating). Push the ignition coil 12V, when the primary 10 turns, 30W or so.Input voltage DC 5V~12V, this voltage range is the voltage when working, not the voltage when the power supply is no-load! (The seller does not ensure normal operation if the voltage exceeds 12V or is lower than 5V. If the input voltage is not within this range, the seller will not be responsible for any problems!)Confirm that all components are welded correctly, and the power cord is not reversed. After connecting the load (heating coil), then power on! No power on without load! No-load power on is easy to damage!The width of the heated object should be as far as possible between 1/3~1/2 of the inner diameter of the heating coil, not more than 2/3!The diameter of the heating object should be controlled within 20mm as much as possible. If it is too large, it will be more difficult to heat to redness. After all, the power is limited.In induction heating, the power is cut off for 5 minutes to cool. In induction heating, it is better to solder the heating coil directly to the PCB board. For long-term use, it is recommended to use copper tubes as coils and pass water for cooling.In induction heating, it is better to solder the heating coil directly to the PCB board. In the case of induction heating, it should be