Induction Heating Board Module, 1000W Stable Heating PCB Board Module High Frequency for Voltage Inverter

About this item :

• 2.54mm Socket: Induction heating board has a 2.54mm socket, after connecting the voltage regulator, plug in the supporting cooling fan and water pump can be used.
• High Voltage Output: The output side uses 3 M4 copper columns in parallel, can be connected to other outputs such as high voltage package.
• High Power: The power line of 1000W induction heating module adopts full copper laying design, which greatly increases the current and generates less heat.
• PCB Material: The high frequency induction heater is made of 100x100mm military grade PCB with high density and stable performance.
• Heat Dissipation: Heating PCB board module adopts 100x32x58mm oversized 5 tooth 4 hole high power heat sink for better heat dissipation.
• Warranty not applicable for this product

Product Details :

• Brand : Fren
• Manufacturer : Fren
• Model : Freniowy62ugg9
• Model Name : Freniowy62ugg9
• Package Dimensions : 27 x 17 x 5 cm
• Item model number : Freniowy62ugg9
• Manufacturer : Fren
• Country of Origin : China

Product Description :

1. PCB Material: The high frequency induction heater is made of 100x100mm military grade PCB with high density and stable performance.2. High Power: The power line of 1000W induction heating module adopts full copper laying design, which greatly increases the current and generates less heat.3. Heat Dissipation: Heating PCB board module adopts 100x32x58mm oversized 5 tooth 4 hole high power heat sink for better heat dissipation.4. High Voltage Output: The output side uses 3 M4 copper columns in parallel, can be connected to other outputs such as high voltage package.5. 2.54mm Socket: Induction heating board has a 2.54mm socket, after connecting the voltage regulator, plug in the supporting cooling fan and water pump can be used.Specification:Item Type: Induction Heating BoardMaterial: PCBSize:Heating Plate: Approx. 100 x 100mm/3.9 x 3.9inHeat Sink: Approx. 100 x 32 x 58mm/3.9 x 1.3 x 2.3inInput Voltage: 12V-48 Recommended 36VPower Requirements: Less Than 12V?10A, More Than 15V ? 15ACurrent: 20APower: 1000WHow to Use:1. Work with a lot of power in addition to the board and components heat, the heat of the copper tube is also very large. Buyers can provide their own water?cooled cooling system, you can buy a small pump and about 2 meters of inner diameter of 4mm rubber water pipe; you can also buy a package of matching pumps2. The use of switching power supply must be noted that high?power switching power supply generally has a slow start function, that is, when the output voltage rises slowly, and if the voltage rises to 12V before the induction heating circuit will be connected because the voltage is not enough to cause the circuit to oscillate, so that the 2 MOS tubes on at the same time and burned components, so be sure to make the switching power supply voltage stability before accessing the induction heating circuit3. Try not to heat too large volume of metal, otherwise it may