Brand : KNL
Category : Water Purifiers
4.3 out of 5 stars
88 ratings..
KNL Water purifiers? purification stages: Stage 1) Pre- filter (PP Spun filter 10?) captures particles (clay, sand, dust, rust, colour etc) those remain in size of 5 micron or above in raw water and then goes to sediment filter Stage 2) Sediment Filter 5 micron absolute: made from sediment cloth and polypropylene layers. Polypropylene is resistant to bacteria. The filter captures suspended matter such as sand, silt, loose scale, clay and organic material from the water and supplies clean water to carbon block filter and membrane Stage 3) Activated Carbon Block filter made from compressed carbon of 1000 IV, very high absorption rate of impurities like chlorine, pesticides, herbicides, toxicity, smell and other harmful chemicals and then supplies chlorine free water to membrane Stage 4) NF80 membrane: TFC dry 100 gpd, pore size is 0.0002 microns, reduces TDS around 80% ( ? 5%), flux rate (20-23) litres/hr and water wastage is around 70%, suitable for input water TDS between 600 ppm to 1200 ppm or maximum 1300 ppm. Please note water molecule size is 0.000283 microns, water born bacteria/germs/viruses sizes remain between 0.027 micron to 5 micron & NF80 membrane pore size is 0.0002 micron which is very much smaller than germs/viruses. In our technology 100% water passes through membrane that gives hygiene, healthy and mineral enriched drinking water. Stage 5) AAA Filter - (Antibacterial, Alkaline & Antioxidant) is use to to enhance pH (alkaline) up to pH 3.5 & minerals in drinking water. We use regulator to regulate pH value of drinking water. Recommended ideal drinking water mineral is 100 ppm to 300 ppm and pH between 7.2 to pH 8. Stage 6) Activated Post Carbon (Coconut Shell): Coconut is antibacterial agent and therefore inhibits the bacterial growth, removes odour, smell and sweeten the drinking water taste.